Deskripsi ISCAR VCMT 160404-SM IC907 Insert Family Designation: VCMT-SM 35° rhombic 7° positive flank inserts used for semi-finish and finish turning. Chip breaking in moderate feed range. Positive rake, low cutting forces. Used for a wide range of materials, including soft and exotic alloys. Item Designation: VCMT 160404-SM Grade : IC907 A tough sub-micron substrate, TiAlN PVD coated. Suitable for low-to-medium cutting speeds. Developed for machining of heat resistant alloys, austenitic stainless steel and hard steel. ISO Range – P/M/K (P10-P30)(M05-M20)(K15-K30) ISO Range – H/S/N (H05-H15)(S05-S20)(N05-N20) Grade or Coating Type PVD Coating Layers TiAlN TiN Cutting Speed for: VCMT 160404-SM IC907 – 5504877 ISO Material Material Description Material Condition Cutting Speed Recommendations P 1 Non-alloy steel and cast steel, free cutting steel <0.25%C Annealed :125 120-200 m/min P 2 Non-alloy steel and cast steel, free cutting steel >=0.25%C Annealed :190 100-170 m/min P 3 Non-alloy steel and cast steel, free cutting steel <0.55%C Quench and tempered. :250 80-150 m/min P 4 Non-alloy steel and cast steel, free cutting steel >=0.55%C Annealed :220 90-160 m/min P 5 Non-alloy steel and cast steel, free cutting steel >=0.55%C Quenched & tempered. :300 80-130 m/min P 6 Low alloy & cast steel (less than 5% of alloying elements) Annealed :200 80-150 m/min P 7 Low alloy & cast steel (less than 5% of alloying elements) Quenched & tempered :275 70-130 m/min P 8 Low alloy & cast steel (less than 5% of alloying elements) Quenched & tempered :300 60-120 m/min P 9 Low alloy & cast steel (less than 5% of alloying elements) Quenched & tempered :350 50-100 m/min P 10 High alloyed steel, cast steel and tool steel Annealed :200 80-130 m/min P 11 High alloyed steel, cast steel and tool steel Quenched & tempered :325 50-100 m/min P 12 Stainless steel and cast steel Ferritic/martensitic :200 170-265 m/min P 13 Stainless steel and cast steel Martensitic :240 140-245 m/min M 14 Stainless steel and cast steel Austenitic :180 100-280 m/min K 15 Grey cast iron (GG) Pearlitic/ferritic :180 30-140 m/min K 16 Grey cast iron (GG) Pearlitic/martensiti :260 30-140 m/min K 17 Nodular cast iron (GGG) Ferritic :160 30-140 m/min K 18 Nodular cast iron (GGG) Pearlitic :250 30-140 m/min K 19 Malleable cast iron Ferritic :130 30-140 m/min K 20 Malleable cast iron Pearlitic :230 30-140 m/min S 31 High temp. alloys Fe based Annealed :200 50-80 m/min S 32 High temp. alloys Fe based Cured :280 40-65 m/min S 33 High temp. alloys. Ni or Co based Annealed :250 45-60 m/min S 34 High temp. alloys. Ni or Co based Cured :350 35-45 m/min S 35 High temp. alloys. Ni or Co based Castr :320 30-50 m/min S 36 Titanium (pure) Pure :310 100-180 m/min S 37 Titanium Ti alloys Alpha beta alloys cu :310 50-55 m/min H 38 Hardened steel Hardened :560 20-90 m/min H 39 Hardened steel Hardened :654 30-60 m/min
